IoT & Automation Products

Industry Data Logger 4.0

image1

Industrial Data Logger 4.0 can used to build the custom industrial solution for monitoring  PLC and SCADA, HMI, VFD , Motors, servo, Valves, energy meter, actuators, relays, encoder, RFID and finger print readers and industrial sensors  .


  • Digital IO:                                             
  • 24v 8x Isolated digital input
  • 24v 4x Isolated Digital output  
  • Isolation: 3750VRMS 
  • Analog IO:  8x ADC 0-10V/ 4-20mA max. 10 / 16 bit ADC resolution
  • Wired Connectivity :RS485 MODBUS, RS232 & USB ,Ethernet 10/100Mbps, RDL Expansion Bus 
  • Memory : SD CARD 16GB 
  • Wireless Connectivity :Wi-Fi: 802.11 b/g/n/e/i (802.11n @ up to 150 Mbit/s) Bluetooth: v4.2 Bluetooth Low Energy (BLE) LoRa / Xbee, GPRS/GPS
  • RTC :Built-in RTC for stamped data logging  
  • Protocol :TCP-IP, UDP, MODBUS, FTP, RESTFULL, JSON & MQTT 
  • Security :SSL
  • Power supply: 12 - 24v

Cloud PLC 4.0

image2

 Cloud PLC 4.0 supporting for custom programming and wide  range of industrial protocols, like  Modbus, MQTT, JSON, RESTful, TCP/UDP, SNMP protocol, which makes the  monitoring and solution integration, easier than ever for IT engineers  through open source APIs.. 


  • Digital IO: 
  • 24v 8x Isolated digital input
  • 24v 4x Isolated Digital output  
  • Isolation: 3750VRMS 
  • Analog IO: 
  •  8x ADC 0-10V/ 4-20mA max. 
  • 10 / 16 bit ADC resolution,3xDAC 0-10V ,1x 4-20ma TX, 3xADC 0-5v
  • Wired Connectivity :RS485 MODBUS, RS232 & USB ,Ethernet 10/100Mbps, RDL Expansion Bus 
  • Memory :SD CARD 16GB 
  • Wireless connectivity: Wi-Fi: 802.11 b/g/n/e/i (802.11n @ up to 150 Mbit/s) Bluetooth: v4.2 Bluetooth Low Energy (BLE) LoRa / Xbee, GPRS/GPS
  • RTC :Built-in RTC for stamped data logging  
  • Protocol :TCP-IP, UDP, MODBUS, FTP, RESTFULL, JSON & MQTT 
  • Security :SSL 
  • Power supply :DC 12 - 24v


Biometric Authentication System for PLC and SCADA

image3

RDL Biometric Add on Block product is  designed to seamlessly integrate with the shop floor machinery. The  flexible and customizable design allows you to control various operations like switching machine job operation, down time escalation  and product loss escalation.

The product is tested with all major PLC /HMI vendors and supports multiple interface options.


  • 12 to 24 volts DC Supply.
  • Support for RS232/ RS485 RTU / TCP communication.
  • On Board USB enabled for device configuring.
  •  Support up 16 / 32 GB inbuilt SD card on board for data log storage 
  •  On board RTC enabled .
  • Storage capacity: 1000 pieces
  • Security Level: Five (from low to high: 1,2,3,4,5)
  • Fake rate (FAR): <0.001%
  • Refusal rate (FRR): <1.0%
  • Search time: <1.0 seconds (1: 1000 hours, mean value)
  • Enclosure:
    • IP 20 
    • Mounting: Wall / DIN Rail


Automated Machine Fault Alerting System

image4

 Add on Automated Fault  Alerting  block for any existing PLC & SCADA environment to send emergency alert as SMS to remote user on real time basis .


  • Support for RS232 / RS485 MODBUS RTU / TCP communication protocol .
  • GSM GPRS SIMCOm800c Modem communication.
  • Support both Wall and DIN mount requirements
  • Input Power Supply 36V


  • Custom Built software for adding / deleting / assigning user and Fault status messaging system
  • Enclosure:
    • IP 20 
    • Mounting: Wall / DIN Rail

UHF RFID Reader

image5

UHF RFID Reader by RDL Technologies is  designed keeping in mind about the Industrial Environment. UHF RFID  Reader is designed to monitor and identify the tracks and pallets by  integrating with PLC and SCADA

 

  • DC Supply Voltage: 5-30V
  • Frequency: 840-960MHZ
  • Output power: 18-26 dBm 
  • Output power accuracy: +/- 1dB
  • Output power flatness: +/- 0.2dB
  • Receive sensitivity: < -70dBm 
  • Protocol: EPC global UHF Class 1 Gen 2 / ISO 18000-6C
  • Operating time: <100mS
  • Read/write range: Read: 50-200cm; write: 5-10cm   (Read range subject to environment and tag Manufacturer)
  • Store tag peak speed: > 50pcs/sec
  • Tags RSSI: Support 
  • Communication interface: RS232 /  Rs485
  • Communication baud rate: 115200 bps  (default and recommend) 38400bps 
  • Operation temp.: - 20 °C - + 70 °C 
  • Storage temp.: - 20 °C - + 85 °C
  • Working humidity: < 95% ( + 25 °C) 
  • External Dimension(mm): 84x59x34 
  • Enclosure: IP65

RS485 RTU to Modbus TCP converter

image6

RDL industrial MODBUS RTU converter allows to communication with Modbus RTU devices to  Modbus TCP network  .

 

  • 5 to 24 volts DC Supply.
  • Support up to 32 Modbus RTU salve device
  • One serial RS232 com port.
  • On board RTC enabled.
  • Support to configure the device through the software
  • Enclosure:
    • IP 20 
    • Mounting: Wall / DIN Rail

Contact Us

Drop us a line!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Better yet, see us in person!

We love our customers, so feel free to visit during normal business hours.

Message us on WhatsApp

RDL Technologies Pvt Ltd

RDL Technologies PVT LTD, 4th floor , oberle Tower , Balmatta, Mangalore, KA 575002, IN

098862 71407

Hours

Mon

09:00 am – 05:00 pm

Tue

09:00 am – 05:00 pm

Wed

09:00 am – 05:00 pm

Thu

09:00 am – 05:00 pm

Fri

09:00 am – 05:00 pm

Sat

Closed

Sun

Closed