Cloud PLC 4.0
IoT Requirement
IoT Requirement
IoT Requirement
Define your Solution
Select Hardware
IoT Requirement
IoT Requirement
Select Open Hardware Platform
Build Solution
IoT Requirement
Build Solution
Use familiar OpenSource IDE to build custom solution
Cloud PLC 4.0 NEXT GENERATION open source controls!
Cloud PLC 4.0 series defines a new way of transforming factories into smart/intelligent factories for efficient and easy remote monitoring and controlling the operational status of facilities such as on/off status, pressure and temperature. Cloud PLC 4.0 supporting for wide range of industrial protocols
like Modbus, MQTT, JSON, RESTful, TCP/UDP, SNMP protocol, which makes the monitoring and solution integration, easier than ever for IT engineers through open source APIs..
Benefits
Cloud PLC 4.0 can used to build the custom industrial solution for monitoring and controlling PLC and SCADA, HMI, VFD,Motors, servo, Valves, energy meter,
actuators, relays, encoder, RFID and fingerprint readers, industrial sensors and many more with below mentioned operational benefits..
- Simplified logging network as RDL Data Logger supports multiple features
- Paper-less Production environment
- Production count, rejections
- Machine availability and Downtimes
- Preventive maintenance
- Performance Forecasting
- Enable Management by IT
Application
- Production and process monitoring.
- Utilities monitoring.
- Condition monitoring.
- Environment monitoring.
- Industrial Smart grid
- Leakage detection.
- Cold storage monitoring.
- District metering.
- Water treatment.
- Generator monitoring.
- Green House.
- Warning message in case of calamities.
- Standard SCADA Applications
Features
- Digital IO:
- 24v 8x Isolated digital input
- 24v 3x Isolated Digital output
- Isolation: 3750VRMS
- Analog IO:
- 8x ADC 0-10V/ 4-20mA max.
- 10 / 16 bit ADC resolution
- 3xDAC 0-10V
- 1x 4-20ma TX
- 3xADC 0-5v
- Wired Connectivity
- RS485 MODBUS, RS232 & USB
- Ethernet 10/100Mbps, RDL Expansion Bus
- Memory
- FRAM 25KB, SD CARD 16GB
- Wireless connecvity
- Wi-Fi: 802.11 b/g/n/e/i (802.11n @ up to 150 Mbit/s) Bluetooth: v4.2 Bluetooth Low Energy (BLE) LoRa / Xbee, GPRS/GPS
- RTC
- Built-in RTC for stamped data logging
- Protocol
- TCP-IP, UDP, MODBUS, FTP, RESTFULL, JSON & MQTT
- Security
- SSL
- Power supply
- DC 12 - 24v
- Enclouser
- IP 20
- mounting: Wall / DIN Rail
- Dimension (LxWxH): 155x82x58.5
Hardware Functional Block diagram
Cloud PLC 4.0
Automated Machine Fault Alerting System
Achieve higher productivity and utilization with Industry 4.0 features of Automated Machine Fault Altering system. Enabled with Preventive Analytics using Machine Learning reduces downtime and improves efficiency. Supports Industry Standard Interfaces sensors and interfaces, protocols. Alerts variety of devices and customizable dashboards
Predictive Condition Monitoring System
Deep Analytics based system, provide insight into prevailing conditions on the Production Floor. Ingests and process data from multiple sensors to deliver actionable intelligent reports. Enable management of large work force with minimal Technical expertise.
Open Source Programming IDE
ARDUINO IDE
Arduino Compatible Compiler for LabVIEW
ATMEL Studio
The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. It runs on Windows, Mac OS X, and Linux. The environment is written in Java and based on Processing and other open-source software.
ATMEL Studio
Arduino Compatible Compiler for LabVIEW
ATMEL Studio
integrated development platform (IDP) for developing and debugging all AVR® and SAM microcontroller applications. The Atmel Studio 7 IDP gives you a seamless and easy-to-use environment to write, build and debug your applications written in C/C++ or assembly code .(www.atmel.com)
Arduino Compatible Compiler for LabVIEW
Arduino Compatible Compiler for LabVIEW
Arduino Compatible Compiler for LabVIEW
The ArduinoTM compatible compiler for LabVIEWis a compiler that will take a LabVIEW program and compile and download it to ArduinoTM compatible targets. The downloaded code will execute embedded and standalone on the Arduino target (www.tsxperts.com)
ThingSpeak for IoT
ThingSpeak for IoT
Arduino Compatible Compiler for LabVIEW
ThingSpeak™ is an IoT analytics platform service from MathWorks®, the makers of MATLAB® and Simulink®. ThingSpeak allows you to aggregate, visualize, and analyze live data streams in the cloud. ThingSpeak provides instant visualizations of data posted by your devices or equipment. Execute MATLAB code in ThingSpeak, and perform online analysis and processing of the data as it comes in.
Soapbox Snap
ThingSpeak for IoT
Soapbox Snap
SoapBox Snap is a free and open source PC-based automation platform. It includes a ladder logic editor and a “soft” runtime right out of the box. The ladder editor includes standard instructions like contacts, coils, timers, counters, rising edge and falling edge, and set/reset instructions.
Order Information
OEM & White label Service
RDL OEM (Original Equipment Manufacturer) that designs and builds a product based on their own specification, and then sells it to another company for branding and distribution.
OEM Minimum order quantity 100 to 500 no's.
CUSTOM SOLUTION DEVELOPMENT
Quick adaptability to any kind of customization requirements be it structural, functional, or Look-and-feel. Seamless transformation made possible for every possible aspects to tailor the standard products to realise your creative imagination.
Dynamic Process Support
Highly Flexible, competitve, and economical solutions encompassing support for wide variety of business domains where customers are sure of getting delightful business deals.