RDL Technologies Pvt.Ltd
ARM Development Board-LPC2129 With CAN Protocol

ARM Development Board-LPC2129 With CAN Protocol

LPC2129 is a single-chip 32-bit microcontroller with 256KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 16KB RAM having Real Time Clock, Watchdog Timer, General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL. This IC also supports Interrupt Controller, 2 SPI serial interfaces, Two UARTs, I2C serial interface, PWM unit with up to 6 PWM outputs, Two timers (7 capture/compare channels),  4-channels 10bit ADC, 2 CAN channels. 

Order Code : RDL/LPC-29C/14/001/V1.0

Features:

  • High quality ARM development board.
  • Power supply, 9V-12V
  • 52 pin Female burg connector for various Arm controller mount.
  • I2C bus.
  • 2- CAN busses
  • USB-FT232 Driver.
  • Node connectors
  • 4x1  7 segment display
  • Raspberry Pi expansion connectors.
  • Stackable Arduino shields.
  • ON/OFF slide switch.
  • SPI bus
  • DC 3.3V connectors
  • DC 5V connectors
  • 2- DB-9 female connector.
  • External jumper nodes.
  • The MAX232 chip RS232 communication.
  • All IO ports pin have extraction and clearly marked.
  • On Board Power supply 3.3V,5V,GND.
  • On board ISP Programmer.
  • 8x1 LED’s
  • 8 way DIP switch
  • Micro SD memory card slot
  • 6 Channel 5V to 3.3V Bi-directional level converter
  • 3 Analog pot.
  • Reset button.
  • 4x1 keypad
  • 16x2 LCD connectors
  • 4x4 Matrix Keypad
  • Power plug-in DC Socket.
  • Test led for Tx, Rx.
  • Power ON switch.
  • All IO’s are connected by brug stripps for easy connection.
  • High quality PCB FR4 Grade with FPT Certified.

 

 

1.  Power supply, 5V-9V

2. Power ON switch  

3.  USB Programming port **

4.  DC 3.3V connectors

5.  ARM in built USB port

6.  DB-9 serial female connector-1

7.  DB-9 serial female connector-2

8. Micro SD memory card connector **

9.  Node connector

10. Variable resistor POT

11. CAN bus*

12. 4x1 Keypad

13. 16x2 LCD connectors

14. Node connector

15. 4x4 Keypad matrix

16. 8 way DIP switch

17. Bi-Directional Voltage Level Converter (3.3V-5V)

18. 8x1 LED’s

19. 52 Pin female header for mounting different ARM processors

20. ARM LPC 2129

21. USB to TTL FT232 external connector

22. 4x1 7 Segment display

23. External I2C bus connector

24. Node connectors

25. Stackable header for Arduino Shields.

26. 26 pin raspberry connector.

27. Program/Run Mode selector

28. External SPI bus connector

 

*Optional

** SD card holder and mini USB port are placed at the bottom of the PCB.


Stackable Arduino shields:


 


Package Contains :
  • ARM Development Board-LPC2129 + LCD + Mini USB Cable
Documents:
  • Datasheet          (ARM Development Board LPC2129)
  • Program Guide  (ARM Development Board LPC2129)
  • Software             (ARM Development Board LPC2129)
  • Code                    (LED Blink)
  • Code                    (7 Segment)
  • Code                    (UART)
  • Code                    (Keypad)
  • Code                    (LCD)
  • Code                    (ADC)
E-Books and Project Book:
  • Book (MATLAB)
  • Book (Interfacing VB.Net with Embedded System)
  • Book (Interfacing Php with Embedded System)
  • Book (Interfacing C#.Net with Embedded System)
  • Book (Interfacing Android with Embedded System)
  • Book (Project Idea's Book)
4,856.00 3,889.00

Reviews